How to Temporarily Cover a Broken Car Window (2024)

ByVeronica Graham

Step 1

Remove the Glass

• Remove all the glass from the broken car window while wearing thick work gloves.
  • Use a hammer to remove stubborn shards of glass, tapping firmly but not excessively hard so you don’t shatter the glass into additional pieces.
• Dispose of the glass in a paper bag. Seal the bag with tape and toss it into the trash.
• Vacuum the inside of the car thoroughly to catch the finer shards of glass.

P.S. If a rock ever gets lodged into your windshield, you’ll want to have these windshield repair kits handy.

Gregor Schfer / EyeEm/Getty Images

Step 2

Clean the Window Frame

• Wipe the window frame and seal with a damp microfiber cloth to clean off dirt and dust.
• Let the window frame and seal dry completely.

Veronica Graham for Family Handyman

Step 3

Prepare the Plastic and Tape

• Measure the length and width of your car window with a measuring tape.
• Unfold the plastic garbage bag and cut a rectangle to fit your car window, plus about 1/2-in. all around. You should be able to pull the plastic taut and tape it to the car without having an excessive amount of extra plastic around the edges, which can be tricky to trim after the plastic is taped.
  • Pro tip: Cutting the plastic bag is easier indoors. If you have to do it outside and it’s breezy, gather rocks or other weights ready to keep the bag from blowing away.
• Cut up eight to 10 pieces of masking tape, each about one to two inches long.
  • Pro tip: Place tape on the car door so it’s ready when you need it.

via walmart.com

Step 4

Tape the Plastic Garbage Bag

• Open the car door to attach the plastic garbage bag from the inside of the car.
• Align the plastic to the top inner corner of the window frame.
• Apply a piece of masking tape to the plastic bag and the car window frame, placing the tape underneath the rubber window seal.
• Pull the plastic taut and adhere it to the top outer corner with a piece of masking tape, placing the tape underneath the rubber window seal.
• Adhere one to two more pieces of masking tape along the top of the window to secure the plastic.
• Pull the plastic taut and adhere it to the bottom inner corner of the window frame with a piece of masking tape.
• Pull the plastic taut and adhere it to the bottom outer corner of the window frame with a piece of masking tape.
• Adhere one to two more pieces of masking tape along the sides of the window to secure the plastic.
• Adhere one to two more pieces of masking tape along the bottom of the window to secure the plastic.
  • Pro tip: Duct tape may be necessary to secure the plastic along the bottom if the masking tape doesn’t adhere as well to the soft rubber of the door. Don’t use duct tape exclusively because it will damage the car paint when you peel it off the frame.

Veronica Graham for Family Handyman

Step 5

Create the Seal

• Cut six to eight long pieces of masking tape, enough to go around the entire window perimeter.
• Adhere the tape around the plastic to secure the first layer of tape and create a seal to keep out air and water.
  • Pro tip: Again, duct tape may be necessary for the bottom seal if the masking tape doesn’t adhere as well to the soft rubber of the door.

Veronica Graham for Family Handyman